agilent t-1 3 / 4 (5 mm), t-1 (3 mm), high intensity, double heterojunction algaas red led lamps data sheet hlmp-d101/d105, hlmp-k101/k105 description these solid state led lamps utilize newly developed double heterojunction (dh) algaas/gaas material technology. this led material has outstanding light output efficiency over a wide range features ?exceptional brightness ?wide viewing angle ?outstanding material efficiency ?low forward voltage ?cmos/mos compatible ?ttl compatible ?deep red color applications ?bright ambient lighting conditions ?moving message panels ?portable equipment ?general use of drive currents. the color is deep red at the dominant wavelength of 637 nanometres. these lamps may be dc or pulse driven to achieve desired light output. package dimensions ab c 1.14 (0.045) 0.51 (0.020) 3.43 (0.135) 2.92 (0.115) 24.1 (0.95) min. 4.70 (0.185) 4.19 (0.165) 3.17 (0.125) 2.67 (0.105) 2.79 (0.110) 2.29 (0.090) 1.52 (0.060) 1.02 (0.040) 6.35 (0.250) 5.58 (0.220) 0.55 (0.022) 0.40 (0.016) cathode ? 0.65 (0.026) max. sq. typ. shoulder cathode
2 selection guide luminous intensity iv (mcd) at 20 ma 2 1/2 [1] package package description device hlmp- min. typ. max. degree outline t-1 3/4 red tinted diffused d101 35.2 70.0 65 a d101-j00xx 35.2 70.0 65 a d101-jk0xx 35.2 70.0 112.8 65 a t-1 3/4 red untinted non-diffused d105 138.0 240.0 24 b d105-m00xx 138.0 240.0 24 b d105-no0xx 200.0 290.0 580.0 24 b t-1 red tinted diffused k101 22.0 45.0 60 c k101-100xx 22.0 45.0 60 c k101-ij0xx 22.0 45.0 70.4 60 c t-1 red untinted non-diffused k105 35.2 65.0 45 c k105-j00xx 35.2 65.0 45 c k105-kl0xx 56.4 110.0 180.4 45 c note: 1. 1/2 is the off axis angle from lamp centerline where the luminous intensity is 1 / 2 the on-axis value. part numbering system hlmp - x x xx - x x x xx mechanical option 00: bulk 01: tape & reel, crimped leads 02: tape & reel, straight leads a1: right angle housing, uneven leads, t1 a2: right angle housing, even leads, t1 b1: right angle housing, uneven leads, t-1 3/4 b2: right angle housing, even leads, t-1 3/4 dd, uq: ammo pack color bin options 0: full color bin distribution maximum iv bin options 0: open (no max. limit) others: please refer to the iv bin table minimum iv bin options please refer to the iv bin table lens type 01: tinted, diffused 05: untinted, nondiffused color options 1: algaas red package options d: t-1 3/4 k: t-1
3 absolute maximum ratings at t a = 25 c parameter value peak forward current [1,2] 300 ma average forward current [2] 20 ma dc current [3] 30 ma power dissipation 87 mw reverse voltage (i r = 100 a) 5 v transient forward current (10 s pulse) [4] 500 ma led junction temperature 110 c operating temperature range -20 to +100 c storage temperature range -55 to +100 c wave soldering temperature [1.59 mm (0.063 in.) from body] 250 c for 3 seconds lead solder dipping temperature [1.59 mm (0.063 in.) from body] 260 c for 5 seconds notes: 1. maximum i peak at f = 1 khz, df = 6.7%. 2. refer to figure 6 to establish pulsed operating conditions. 3. derate linearly as shown in figure 5. 4. the transient peak current is the maximum non-recurring peak current the device can withstand without damaging the led die an d wire bonds. it is not recommended that the device be operated at peak currents beyond the absolute maximum peak forward current. electrical/optical characteristics at t a = 25 c symbol description min. typ. max. unit test condition v f forward voltage 1.8 2.2 v i f = 20 ma v r reverse breakdown voltage 5.0 15.0 v i r = 100 a p peak wavelength 645 nm measurement at peak d dominant wavelength 637 nm note 1 ? 1 / 2 spectral line halfwidth 20 nm s speed of response 30 ns exponential time constant, e -t /t s c capacitance 30 pf v f = 0, f = 1 mhz r j-pin thermal resistance 260 [3] c/w junction to cathode lead 210 [4] 290 [5] v luminous efficacy 80 im/w note 2 notes: 1. the dominant wavelength, d , is derived from the cie chromaticity diagram and represents the color of the device. 2. the radiant intensity, i e , in watts per steradian, may be found from the equation i e = l v / v , where i v is the luminous intensity in candelas and v is luminous efficacy in lumens/watt. 3. hlmp-d101. 4. hlmp-d105. 5. hlmp-k101/-k105.
4 figure 3. relative luminous intensity vs. dc forward current. figure 4. relative efficiency vs. peak forward current. figure 5. maximum forward dc current vs. ambient temperature. derating based on t j max. = 110 c. figure 6. maximum tolerable peak current vs. peak duration (i peak max. determined from temperature derated i dc max.). figure 1. relative intensity vs. wavelength. figure 2. forward current vs. forward voltage.
5 figure 7. relative luminous intensity vs. angular displacement. hlmp-d101. figure 8. relative luminous intensity vs. angular displacement. hlmp-k101. figure 9. relative luminous intensity vs. angular displacement. hlmp-d105. figure 10. relative luminous intensity vs. angular displacement. hlmp-k105.
intensity bin limits intensity range (mcd) color bin min. max. red i 24.8 39.6 j 39.6 63.4 k 63.4 101.5 l 101.5 162.4 m 162.4 234.6 n 234.6 340.0 o 340.0 540.0 p 540.0 850.0 q 850.0 1200.0 r 1200.0 1700.0 s 1700.0 2400.0 t 2400.0 3400.0 u 3400.0 4900.0 v 4900.0 7100.0 w 7100.0 10200.0 x 10200.0 14800.0 y 14800.0 21400.0 z 21400.0 30900.0 note: all categories are established for classification of products. products may not be available in all categories. please contact your local agilent representative for further clarification/information. mechanical option matrix mechanical option code definition 00 bulk packaging, minimum increment 500 pcs/bag 01 tape & reel, crimped leads, minimum increment 1300 pcs (t-1 3/4)/1800 pcs (t-1) 02 tape & reel, straight leads, minimum increment 1300 pcs (t-1 3/4)/1800 pcs (t-1) a1 right angle housing, uneven leads, minimum increment 500 pcs/bag a2 right angle housing, even leads, minimum increment 500 pcs/bag b1 right angle housing, uneven leads, minimum increment 500 pcs/bag b2 right angle housing, even leads, minimum increment 500 pcs/bag dd ammo pack, straight leads in 2k increment uq ammo pack, horizontal leads in 2k increment maximum tolerance for each bin limit is 18%. 6
www.agilent.com/semiconductors for product information and a complete list of distributors, please go to our web site. for technical assistance call: americas/canada: +1 (800) 235-0312 or (916) 788-6763 europe: +49 (0) 6441 92460 china: 10800 650 0017 hong kong: (+65) 6756 2394 india, australia, new zealand: (+65) 6755 1939 japan: (+81 3) 3335-8152 (domestic/interna- tional), or 0120-61-1280 (domestic only) korea: (+65) 6755 1989 singapore, malaysia, vietnam, thailand, philippines, indonesia: (+65) 6755 2044 taiwan: (+65) 6755 1843 data subject to change. copyright ?2004 agilent technologies, inc. obsoletes 5968-1440e november 12, 2004 5988-2230en
|
